广州市唯博电子科技有限公司（南京托肯华南服务中心）供应TKC-TG2 系列电流传感器的初、次级之间是绝缘的；用于两相直流、交流和脉冲电流的测量。 The TG2 series current sensor is a open loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of three phase DC, AC or pulsed currents. 应用 Applications  变频调速系统 Variable speed drives  电焊机 Welding machine  通讯电源 Battery supplied applications  不间断电源 UPS Uninterruptible Power Supplies (UPS)  电化学 Electrochemical 使用说明 Directions for use 1. 产品箭头的方向为 Ip 方向。 It will be in a forward direction when the Ip flows according to the direction of the arrowhead. 2. 初级导体温度不应超过 120℃。 The primary conductor should be≤120℃. 3. 母排完全充满初级穿孔时动态表现（di/dt 和响应时间）为优。 The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar. 4. 当待测电流从传感器穿过，即可在输出端测得电压大小。(注意：错误的接线可能导致传感器损坏) When the current will be measured goes through a sensor, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the sensor) 5. 传感器的输出幅度可根据用户需要进行适当调节。 Customs can adjust Output amplitude of the sensor by needs. 6. 可按用户需求定制不同额定输入电流和输出电压的传感器。