类型：胶垫

型号：gyz

产品等级：1

形状：长方形

材质：橡胶

橡胶支座由多层天然橡胶与薄钢板镶嵌、粘合、硫化而成一种桥梁支座产品。

The rubber bearing is a kind of bridge bearing product, which is inlaid, glued and vulcanized with multilayer natural rubber and thin steel plate.

该种类型的橡胶支座有足够的竖向刚度以承受垂直荷载，且能将上部构造的压

This kind of rubber bearing has enough vertical rigidity to bear vertical load and can press the upper structure

力可靠地传递给墩台；有良好的弹性以适应梁端的转动；有较大的剪切变形以

Reliable power transfer to the pier; have good flexibility to adapt to the rotation of the beam end; a larger shear deformation in

满足上部构造的水平位移具有构造简单、安装方便、节省钢材、价格低廉、养

The horizontal displacement of the upper structure has the advantages of simple structure, convenient installation, steel saving, low price and high maintenance

护简便、易于更换等特点。

Easy to ***, easy to replace and so on.

在板式支座表面粘复一层1.5mm-3mm厚的聚四氟乙烯板，就能制作成聚四

A layer of 1.5mm-3mm thick PTFE plate bonded on the surface of the plate bearing can be made into poly four

氟乙烯滑板式橡胶支座它除了竖向钢度与弹性变形，能承受垂直荷载及适应梁

The Teflon sliding plate rubber bearing, in addition to the vertical steel and elastic deformation, can bear the vertical load and the adaptive beam

端转动外，因聚四氟乙烯板的低摩擦系数，可使梁端在四氟板表面自由滑动，

Because of the low friction coefficient of the PTFE plate, the end of the beam can slide freely on the surface of the PTFE plate,

水平位移不受限制，特别适宜中、小荷载，大位移量的桥梁使用。

The horizontal displacement is not restricted, especially suitable for medium and small load, large displacement bridge use.