zhirongscale

Installation Manual of the lion series truck scales

1.  Check the No. on the scale body and match it as the follows. If there are two truck scales, it will be marked as A1, A2…A11 A12 and B1, B2,B3…B11, B12.

2. Scale-body assembling:

    Lift the scale bodies and match it according to the marking. Then overturn it and lie them flat. Please be sure to put some small wood underneath the scale body so that there will be no scratches on the scale platform. Match the M20 holes to each other and connect the two parts with M20 bolts as instruction in the following drawing.

:

3. Installing load cell and truck scale in the foundation

Before installation, please unscrew the end bar on the platform of the scale body and put them beside the scale.

 a. Put the load cells on the foundation plate according to the marking on the

load cell. The marking of the load cell should be consistent to the marking

on the scale bodies.

b. lift and put on the first main scale body marking 1,2,3 and 4 on the load cells, the marking of the scale bodies should be matching to the marking on the load cells

       c. Lift and put the second scale body marking 5,6,7 and 8 on the load cell.

Connect the two scale bodies with the pole we supplied(please see this in

the drawing underneath)

       d. Lift and put the third scale body marking 9,10,11 and 12 on the load cell.

Connect the two scale bodies with the pole we supplied (please see this in

the drawing underneath). Adjust the scale-body after placing is finished.